| Guide number |
148
|
| Manual |
Manual mode for full light output at the specified guide number.
|
| Tilt-and-swivel reflector |
Can be swivelled horizontally and/or tilted vertically by the specified angle for bounce flash photography.
|
| Flash-ready indication |
Indicates whether the flash capacitor is fully charged.
|
| Clip-on wide-angle diffuser |
A clip-on wide-angle attachment for 35mm exposures (24 x 36 mm) with lenses of 28 mm focal length and longer.
|
| Power source |
6 "AA" Batteries (alkaline, NiCd or NiMh)
|
| Winder mode |
Allows to shoot a sequence of pictures at a rate of 2 or 3 frames/sec.
|
| SCA 3000 |
SCA 3000 has been developed as an improvement of the successful SCA 300 system. The principal feature of SCA-3000 is the ability of evaluation and transmission of digital data. All SCA 3000 flashguns from Metz can also be operated with the adapters of th |
| TTL Dedication |
Yes
|
| Correct-exposure signal |
Lights up to indicate that the frame was correctly exposed
|
| T/I |
An energy saving thyristor circuit that cuts off the flash after the frame has been correctly exposed, and stores the remaining power for the next flash.
|
| Telecomputer |
The telecomputer measures the light reflected from the subject and automatically cuts off the flash as soon as sufficient light has been emitted for correct exposure.
|
| Partial light output mode |
Allows to diminish the light output level and to program a fixed flash duration.
|
| Secondary reflector |
This is used to brighten shadows created by indirect flash, e.g. flash bounced off the ceiling.
|
| LED |
A Light Emitting Diode used to display the selected telecomputer aperture, zoom settings, etc.
|
| Dimensions |
3.6 X 9.7 X 4.0" (WxHxD)
|
| Weight |
1.50 lb |
