| Guide number |
197
|
| Manual |
Manual mode for full light output at the specified guide number.
|
| Tilt-and-swivel reflector |
Can be swiveled horizontally and/or tilted vertically by the specified angle for bounce flash photography.
|
| Flash-ready indication |
Indicates whether the flash capacitor is fully charged.
|
| Clip-on wide-angle diffuser |
A clip-on wide-angle attachment for 35mm exposures (24 x 36 mm) with lenses of 28 mm focal length and longer.
|
| Power source |
(5322) Nicad Battery, (5320) Dryfit Battery
|
| Winder mode |
Allows to shoot a sequence of pictures at a rate of 2 or 3 frames/sec.
|
| Motor drive |
Permits a series of pictures to be shot in fast sequence - up to 5 frames per second.
|
| Correct-exposure signal |
Lights up to indicate that the frame was correctly exposed.
|
| T/I |
An energy saving thyristor circuit that cuts off the flash after the frame has been correctly exposed, and stores the remaining power for the next flash.
|
| Telecomputer |
The telecomputer measures the light reflected from the subject and automatically cuts off the flash as soon as sufficient light has been emitted for correct exposure.
|
| Dimensions |
(Flash) 10 X 4.4 X 4" (Power Pack) 5 X 6.5 X 2.5"
|
| Weight |
5.6 lb (with battery) |
